EMC ViPR (S3)
  • 1 Minute to read
  • Dark
    Light
  • PDF

EMC ViPR (S3)

  • Dark
    Light
  • PDF

Article Summary

Warning

New EMC ViPR (S3) storage nodes must not be defined. The storage node is available for backwards compatibility only.

image.png
Bucket Name – A unique name for the EMC ViPR bucket that you want to add as a storage node.
Access Key ID – The EMC ViPR access key ID.
Secret Access Key – The EMC ViPR secret access key.
Endpoint – The endpoint name of the EMC ViPR service. The port for the endpoint can be customized by adding the port after the URL, using a colon (:) separator. The default port is 80.
Use HTTPS – Use HTTPS to connect with the storage node.

  • Trust all certificates – Do not validate the certificate of the object storage. Normally this is unchecked.

Direct Mode – Data is uploaded and downloaded directly to and from the storage node and not via the portal. If direct mode is defined for the storage node, CTERA recommends setting the deduplication method to fixed blocks and keeping the default 4MB fixed block size. For details, see Default Settings for New Folder Groups.

Note

Once Direct Mode is set, the Use HTTPS option is also checked and cannot be unchecked.


Was this article helpful?

What's Next