--- title: "Remotely Awakening Computers" slug: "remotely-awakening-computers-5-1-1" tags: ["7.11", "Edge Filer", "Gateway", "Filer"] updated: 2025-08-26T15:43:46Z published: 2025-08-26T15:43:46Z canonical: "kb.ctera.com/remotely-awakening-computers-5-1-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://kb.ctera.com/llms.txt > Use this file to discover all available pages before exploring further. # Remotely Awakening Computers Administrators can remotely turn on or awaken computers, using the WoL (Wake on LAN) command. This is useful, for example, when there is a need to release a software update. The command wakes up a single device, so must be run multiple times to wake up more than one computer. **To wake up a device:** 1. In the **Configuration** view, select **System > Network** in the navigation pane. The **Network** page is displayed. ![image.png](https://cdn.document360.io/30792387-cdcb-4791-aa14-94929bbcd3fe/Images/Documentation/image-3WMSSTD9.png?sv=2026-02-06&spr=https&st=2026-11-11T04%3A34%3A05Z&se=2026-11-11T05%3A34%3A05Z&sr=c&sp=r&sig=jaMVP%2BsODMW28%2FoB%2B5AkNAi%2FJnf6VWilcUfqk9OlRyU%3D) 2. Click **Diagnostics**. The **Network Diagnostics** window is displayed. ![image.png](https://cdn.document360.io/30792387-cdcb-4791-aa14-94929bbcd3fe/Images/Documentation/image-YJDHT2T2.png?sv=2026-02-06&spr=https&st=2026-11-11T04%3A34%3A05Z&se=2026-11-11T05%3A34%3A05Z&sr=c&sp=r&sig=jaMVP%2BsODMW28%2FoB%2B5AkNAi%2FJnf6VWilcUfqk9OlRyU%3D) 3. Select **Wake** as the diagnostic tool. ![image.png](https://cdn.document360.io/30792387-cdcb-4791-aa14-94929bbcd3fe/Images/Documentation/image-V2NV6996.png?sv=2026-02-06&spr=https&st=2026-11-11T04%3A34%3A05Z&se=2026-11-11T05%3A34%3A05Z&sr=c&sp=r&sig=jaMVP%2BsODMW28%2FoB%2B5AkNAi%2FJnf6VWilcUfqk9OlRyU%3D) 4. Enter the device's MAC address. 5. Optionally, check **Broadcast IP** and enter a broadcast address for the broadcast. 6. Click **Go**. An **OK** message is displayed when the device is awakened. 7. Click **Close**.