Updating the Edge Filer Version

You can configure the CTERA Edge Filer to automatically download firmware updates from the CTERA Portal it is connected to and install this download. Alternatively, you can install firmware updates manually.

After an upgrade, the previous version is saved. When starting up the edge filer the new version is selected and after a couple of seconds, it is started. If  you need to revert to the previous version, during the startup, when both versions are displayed, select the previous version.

Configuring Automatic Firmware Updates

To configure automatic firmware updates:

1. In the Configuration view, select System > Firmware in the navigation pane.
   The Firmware Update page opens, displaying the following information:
   • The currently installed firmware version.
   • The most recent available firmware version.
   • The amount of time remaining until the CTERA Edge Filer restarts. This information is displayed if a firmware has been downloaded, and the CTERA Edge Filer is configured to reboot automatically.
     
2. Click Settings.
   The Automatic Update Settings window is displayed.
   
3. To specify that the CTERA Edge Filer should download and install firmware updates automatically, click Download and install updates automatically.
   If you do not select this option, you must perform firmware updates manually, as described in Manually Upgrading the Firmware.
4. To specify that the CTERA Edge Filer should automatically reboot after installing new firmware updates, do the following:
   1. Click Restart automatically after installing new firmware.
   2. Specify when automatic rebooting should occur, by doing one of the following:
      • To reboot as soon as possible after a firmware update, choose As soon as possible.
        In this case, the CTERA Edge Filer will reboot as soon as it is recommended to do so. For example, the automatic reboot might be deferred, if the CTERA Edge Filer is undergoing system maintenance that should not be interrupted.
      • To reboot only during specific hours, choose During these hours, then use the drop-down lists to specify the desired time range.
        If you do not enable automatic rebooting, then you will need to reboot the CTERA Edge Filer as described in [Restarting the CTERA Edge Filer], when this page indicates that a new update has been installed.
5. Click Save.

Manually Upgrading the Firmware

1. In the Configuration view, select System > Firmware in the navigation pane.
   The Firmware page opens, displaying the currently installed firmware version, as well as the CTERA Edge Filer model.

2. Either,

   1. Click Install from Portal to install the latest version on the CTERA Portal.
   2. Click Yes.

   Or,

   1. Click Install from File.
      The Firmware Update window is displayed.
      
   2. Click Upload and browse to the required firmware (*.firm) file.

The firmware file is uploaded. A progress bar displays the percentage upload.

The CTERA Edge Filer automatically reboots.