Uploading Firmware and Marking It as the Current Image
  • 1 Minute to read
  • Dark
    Light
  • PDF

Uploading Firmware and Marking It as the Current Image

  • Dark
    Light
  • PDF

Article summary

To upload firmware:

  1. In the global administration view, select Settings in the navigation pane.
    The Control Panel page is displayed.
    image.png
  2. Select Firmware Repository, under SETTINGS in the Control Panel page.
    The Firmware Repository window is displayed.
  3. Click Upload.
    The Upload Firmware Wizard opens displaying the Upload Firmware window.
    image.png
  4. Click Upload and browse to the file to upload.
  5. Click Open.
    The firmware is uploaded to the relevant device platform category and a completed window is displayed.
  6. Click FINISH.

Marking Firmware as the Current Firmware

When you mark firmware as the current firmware, all devices of the relevant device platform that are set to automatically download firmware will download this firmware.

Only one firmware is allowed on a device platform.

To mark firmware as the current firmware:

  1. In the global administration view, select Settings in the navigation pane.
    The Control Panel page is displayed.
  2. Select Firmware Repository, under SETTINGS in the Control Panel page.
    The Firmware Repository window is displayed showing the firmware available in the repository.
    image.png
  3. Select the firmware to make current.
  4. Click Mark as Current.

The selected firmware becomes the current firmware and is marked with the image.png icon.

To mark firmware as not current:

  1. In the global administration view, select Settings in the navigation pane.
  2. Select Firmware Repository, under SETTINGS in the Control Panel page.
    The Firmware Repository window is displayed showing the firmware available in the repository.
  3. Select the firmware row.
  4. Click Remove Current.

Was this article helpful?